A look at Analog Devices' wireless power demonstration at APEC 2018
In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless receiver and battery charger with a programmable float voltage to accommodate several battery chemistries. The LTC4120 uses a Dynamic Harmonization Control (DHC) technique that allows high efficiency contactless charging across an air gap.
Latest Webinars, White Papers & more
Implementing Secured Software Updates for IoT Devices
The risk of IoT devices being attacked, modified or misused is high. As such, secured software updates are one of the most critical features of connected devices. This paper provides a comprehensive summary of theoretical approaches and recipes for practical implementation.
IEC 62443: How to Achieve the Highest Levels of Industrial Security
IEC 62443 is a comprehensive standard for industrial security and widely praised for its use of practical but effective countermeasures. In this webinar, Infineon’s industrial security experts will provide an introduction to IEC 62443.
Optimize the integration of capacitors on busbar to achieve lowest inductance
This webinar will review the design of the DC link system using optimized solutions based on standard capacitors integrated onto a laminated busbar. The webinar is beneficial for mechanical and electrical engineers involved in developing power systems and other critical applications.
Learn how serial NAND Flash memories can displace expensive high density SPI NOR types
New emerging applications need robust 512Mb - 2Gb Flash memories for storing boot code and large application code. But NOR Flash starts getting expensive beyond 256Mb. Therefore system architects must consider alternatives.
Using Device Programming to Securely Provision IoT Devices
Devices which are connected to the Internet must be inherently secure from time of birth. A fundamental first step is to incorporate a Secure Element which store important security information in protected way. Secure Elements need to be pre-programmed, or provisioned, in order to be useful.
Learn how the Renesas Synergy AE-CLOUD1 kit enables you to get to cloud connectivity within ten Minutes
During this webinar, you’ll learn how to weigh up the differences between private and public clouds and to use the AE-CLOUD1 kit to quickly interact with one of the currently supported public clouds. We will show how to leverage the Renesas Synergy Platform to establish a secure internet connection.
How to Build A Prototype Faster for Your Human-Machine Interaction Devices
In this webinar, we will introduce a 80/20 development model with ADLINK’s modularized Smart Panel as an embedded building block and go in depth into how to take advantage of the 80/20 development model to cater to specific vertical markets.
Lowest power BLE solution for Bluetooth mesh applications
This webinar will introduce a groundbreaking low power BLE device from Panasonic Industry, offering years of operation using only a CR2032 Battery for simple, prompt and sound IoT designs. The webinar will show that designing the PAN1760A Series into any IoT device is an easy task.
Developing Motor Control Applications with NXP MagniV MCUs
In this webinar, we feature the design and development of a field oriented control for a permanent magnet synchronous motor using NXP MagniV microcontroller. The workflow will guide you through model simulation using SIL/PIL models.
IoT evaluation kit ready-made for Wi-Fi connectivity
This white paper introduces the Quicksilver evaluation kit which caters to a diverse array of IoT applications, ranging from home appliances to smart buildings to energy meters. Powered by a Cypress SoC solution, the kit combines IEEE 802.11 a/b/g/n wireless connectivity with an embedded applications processor.
How to Optimize the Scalability & Performance of a Multi-Core Operating System
When upgrading your hardware platform to a newer and more powerful CPU with more, faster cores, you expect the application to run faster. In many cases, however this is not the case. In this paper, we examine what causes these performance issues.
Form a secure and flexible network with Bluetooh Mesh solutions
In this webinar you will learn about STMicroelectronics' complete software solution for its range of Bluetooth® Low Energy radio transceivers. BlueNRG-Mesh software enables them to form a mesh network.
Meeting the Challenges of Transforming the Digital Building from Concept to Reality
The smart connectivity of buildings should be central to transformation: but the reality is something else. While the ‘digital building’ has been a multi-heralded concept for some time, implementation is more problematic. This White Paper discusses the challenges and advantages of the digital building and how a major industry initiative is helping with the convergence of disparate control systems to enable the concept.
New Generation of Advanced Flash for Connected Platforms
Do you want scalable, secured memory solutions which allow you to utilize existing flash memory layout to harden system level security without additional hardware? So you should attend this webinar and you will learn more about how SpiStack combines the fast random access and XIP capability of NOR with the density and cost effectiveness of NAND in one small, low-pin-count SPI package.
Learn How to Develop Automotive NFC Applications for Embedded Systems
Due to the high popularity of NFC in the consumer market, demand for NFC applications in automotive has increased. In this webinar you will learn about NFC and its use cases for automotive, NFC Forum's NFC Controller Interface (NCI), NXP's NFC Controller NCx3340 and more...
How Flash Memory ICs can support the requirements of Automotive functional safety
Flash memories are nowadays a component in many Automotive systems which are safety-critical. Therefore OEMs are starting to demand a new breed of Flash ICs which can support the requirements of functional safety design at the system level better than previous generations of devices.
How to solve the challenges of creating automated tests for microservices
As an architecture for building complex systems, microservices is gaining significant traction within the development community. The adoption is on the rise, but so are the struggles associated with understanding how to test microservices.
Reliability of metallized ceramic substrates for power electronics application
While solder fatigue and wire lift offs have been the main limiting factors for the lifetime of conventional modules, new technologies for assembly and packaging of semiconductors have emerged and new module generations achieve much longer lifetime. This webinar will provide you some guidance for the selection of the most reliable material combination and design of the substrates.
Pros and Cons of standard Computer-on-Modules for customized solutions
In this webinar you will learn about the advantages and disadvantages of mainboard versus COM modules with customized or modular carriers and what are the pros and cons of an integrated COM system solution vs choosing piece parts from different vendors. We will discuss which solution is in terms of quantity, complexity, project duration and long-term availability.
Display Monitoring: Explore the future of connected and intelligent displays
The world's first cloud for any embedded display via the flatpanel controller offers full connectivity to enable central parameterization and constant monitoring of the operational status of displays. Learn more on how to easily connect displays to the IoT in this white paper.
Selecting Resistors – how to use Data Sheets correctly
The data sheet forms the essential basis for the selection of the right resistor. This white paper uses realistic calculation examples to clearly illustrate how a data sheet can be used to choose the appropriate resistor and what information is important.
Monetizing Software, Machines, and Materials with New Business Models
CodeMeter License Central offers licenses with unit counters and automated processes, which makes pay-per-use models just as simple to handle as permanent or subscription licenses. In this on-demand webinar, we will go through the whole lifecycle from a number of success stories that will get you inspired to the whole set of actions that will get you started.
E-Mail Newsletters
Our 3 E-Mail Newsletters: EETimes/EDN Europe, Embedded News and Power Electronics News inform about the latest news in technology and products, as well as technical know-how like white papers, webinars, articles, etc.
B & S / ECE Magazine- latest issue is online now - |
|
|
May 2018 |
Content HighlightsCover Story From Edge to Fog to Cloud - IoT Computing with SMARC |
